HVAC Maintenance Plans in Orem, UT

Furnace Tune-Up Services Include:

• Inspect heat exchanger for corrosion, separation, cracks or obstructions
• Check and adjust gas pressure – Green sticker
• Inspect blower motor and record amp draw
• Inspect furnace cabinet
• Inspect flame sensor or thermocouple
• Inspect gas burners
• Inspect burner ignition and assembly
• Inspect gas valve for corrosion, leaks, or restrictions
• Inspect gas lines and connections
• Check and program thermostat
• Inspect furnace wiring assembly
• Inspect and test capacitors
• Inspect flue and venting
• Check voltage and amperage
• Check temperature rise across system for proper fan speed
• Inspect readily accessible ducts for leaks
• Check and replace 1” Filter
• Check high limit control
• Give diagnostic of overall operation of system

Air Conditioning Tune-Up Services Include:

• Check and replace 1” Filter
• Inspect outdoor condenser coil
• Inspect indoor evaporative coil (if accessible)
• Check for adequate airflow
• Check and record amp draw of condenser motor and compressor
• Inspect fan blade for cracks or defects
• Check refrigerant levels using super-heat or sub-cooling
• Check and record operating pressures and temperatures
• Inspect condensate drain lines
• Check condensate pump operation

• Inspect and test capacitors
• Tighten contactor terminals
• Inspect contactor points
• Inspect wiring and electrical system
• Inspect cooling system for loose parts or unusual vibration
• Test and adjust air conditioner for peak operating efficiency
• Check and Program thermostat
• Check for oil and refrigerant leaks
• Give Diagnostic of overall operation of system

Plumbing Inspection Included at No Charge When Customer Tunes Up Their Furnace, AC Unit, & Humidifier Services Include:

• Check and adjust water pressure regulator
• Clean and check the water heater:
• Temp & pressure relief valve
• Efficiency
• Clean aerators on all faucets in home
• Check kitchen faucet for leaks and corrosion
• Check water hardness

Inspect toilets:

• Leaks
• Proper flushing
• Water seal
• Adjust to manufacturers specs
• Safety check your home
• Check emergency valves
• Check emergency shut offs